2.4G RF single color LED Controller IND45LAM140-C01RF






Whether you're starting a project from scratch or need assistance finalizing an existing space, our expert team is here to help.
Get expert advice ➜
Description 2.4G RF single color LED Controller IND45LAM140-C01RF
Specifications 2.4G RF single color LED Controller IND45LAM140-C01RF
Measurements 2.4G RF single color LED Controller IND45LAM140-C01RF

Description 2.4G RF single color LED Controller IND45LAM140-C01RF

2.4G RF single color LED Controller IND45LAM140-C01RF for DC12V-24C single white LED strip light, It is so far the most prefered controller, which offer a simple way to control and schedule your home lighting.
2.4G RF single color LED Controller Features:
1. Our RF single color LED controller is the best smart dimmer to manage the brightness of your single white strip light. It has below major features:


2. Connect to the LED strip
 Notice: controller input voltage must be in accordance with the required voltage of the LED strip light.


3.Auto-synchronization function
 Different controllers can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and with the same speed.
4. Auto-transmitting Diagram
One controller can transmit the signal from the remote control to another controller within 30m. As long as there is a controller within 30m, the remote control distance can be limitless.

5. PWM Frequency Switching
Switch to Low Frequency:
Power on the light for over 10 seconds, long press the linked remote zone “ON” button for 10 seconds, when the light blink 3 times, switch to low frequency.
Switch to High Frequency:
Power on the light for over 10 seconds, long press the linked remote zone “ON” button for 10 seconds, when the light blink 10 times, switch to high frequency.
Note:
(1)Application to switch PWM frequency: to avoid noise when using different power supplies.
(2)Use LM007(for DIM or Dual White controller) or IND45LAM112-LM091 (for RGB, RGBW, and RGBCCT controller) remote to switch the frequency.
(3)The default frequency is high frequency.
(4)When the user switches to low frequency, it may cause the light to flick.
6. Do Not Disturb
What is Do Not Disturb: When switching off the power, then switching on, the lights keep off without disturbing the rest of users.
Application to use Do not disturbing function:
(1)Widely use on the area where there is power failure frequently to save energy.
(2) When users go outside for long time, set up Do not disturb to avoid there is short circuit during this time.
Set up Do Not Disturb:
When the lights ON and not under dynamic mode, long press linked remote S+ button for 5 seconds, when the white lights blink once, set up the Do not disturb successfully.
Note:
(1)Do not Disturb will be available when the light is under OFF mode by remote or APP.
(2)When users set up Do not Disturb, the lights need to be switched OFF-ON twice within 5 seconds or use linked remote and APP to turn on the lights normally.
Delete Do Not Disturb:
When the lights ON and not under dynamic mode, long press linked remote S- button for 5 seconds, when the white lights blink 3 times, delete the Do not disturb successfully.
Note:
(1)After delete the Do Not Disturb, the lights will be ON when you switch OFF, then switch ON the power.
(2)The default mode for the device is without Do not Disturb, users must follow above steps to set up Do Not Disturb according to the real application.
(3)Please use our IND45LAM112-LM091 remote or wall remote to set up or delete Do Not Disturb.
As is seen from above,the RF RGB+CCT LED controller is the most convenient controller, which is controlled by a remote directly in a easy way.

Specifications 2.4G RF single color LED Controller IND45LAM140-C01RF

Categories: Wifi+BT controller

Categories: light control

Input Voltage, (V): DC5V/DC12V/DC24V

Output: 7.5A/Channel

Total Output Max: 12A

Controller Type: APP control

Controller Type: RF Remote

Controller Type: Voice Control

Control Method: 2.4G RF remote control

Working Temperature, (⁰): -20-60⁰

Application: smart home

Application: smart lighting

APP Name: Tuya Smart Life

System: iOS/Android

Material structure: V-0 Anti-fire PC

lwh: 75x36x17

Weight: 20g

Measurements 2.4G RF single color LED Controller IND45LAM140-C01RF

Related products