6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070

Color t⁰ (K) ............... 2700-6500
Protection (IP) .......... 20
Dimmable ................ yes

-
Whether you're starting a project from scratch or need assistance finalizing an existing space, our expert team is here to help.
Get expert advice ➜
Description 6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070
Specifications 6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070
Measurements 6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070

Description 6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070

6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070 is a recessed smart LED downlight, using the advanced technology of 2.4G RF.It is compatible with the most well-known brand speakers, such as Alexa and googles assistant. It can be controlled by a smartphone APP(RF gateway is needed), RF remote, and smart speaker, which makes your light more intelligent. This smart downlight is widely used for residential lightings such as living rooms, kitchen rooms, bedrooms, and commercial lighting like offices.
Hole size: φ90~95mm
6W 2.4G RF RGBCCT LED Downlight Features:
1. RF RGBCCT LED Downlight is the most popular smart lighting that is mainly used for smart home and office. It has below major features:
2. Instructions
(1)Please open the hole on the ceiling according to diagram 1. (For the size of the hole , pls refer to the diameter of the corresponding model)
(2)Connect the driver properly according to the wire connection diagram 2. And then put the driver and wire into the ceiling from the hole.
(3)Push in the two spring elements, and make sure that they are deployed and anchored on the back of the ceiling, see Diagrams 3 and 4.
3. Connect to Smartphone
You must link the Tuya 2.4G RF Gateway first to the smartphone, then add the RF downlight to RF gateway for smartphone control.

How to connect RF gateway to a smartphone.

(1). Make sure the smartphone is working on WLAN network.
(2). Power the device, the SYS red pilot lamp will always on means device working normally.
(3). Long press “SET” button for over 3 seconds, the Blue linking pilot lamp will be on means the device come into smart link&reset mode.
(4). Open the signed-in APP, it will discover the devices automatically(If it’s not shown,please click “+ ” on the right top corner, and select “ Add new device” manually), then follow the steps and complete the linking. The Green linked pilot lamp after linking successfully.
(5). Added devices will be displayed on the homepage after linking successfully, then click the device and go into the control interface for more operation.

How to link& unlink controllers &lights to 2.4G gateway
Users must link the gateway to smartphone first, then do the following steps to link and unlink the controller&lamps to gateway.
Link:
(1) Switch OFF the lamps you want to link, then switch ON again, press the “SET” button once on the 2.4G gateway within 5 seconds; when the lights blinking 3 times slowly means linking successfully.
(2) Open the linked APP, choose the white control panel,then Switch OFF the lamps you want to link, then switch ON again, click the first part(0~5%) and end part(95~100%) of Color temperature slider twice in turn(Total 4 times) within 5 seconds;when the lights blinking 3 times slowly means linking successfully.
Unlink:
(1) Switch OFF the linked lamps, then switch ON again,press the “SET” button once on the 2.4G gateway within 5 seconds;when the lights blinking 10 times quickly means unlinking successfully.
(2) Open the linked APP, choose the white control panel,then Switch OFF the linked lamps, then switch ON again, click the first part(0~5%) and end part(95~100%) of Color temperature slider 4 times in turn(Total 8 times) within 5 seconds;when the lights blinking 10 times quickly means unlinking successfully.
4. Signal Transmitting
One Downlight can transmit the signals from the remote control to another Downlight within 30m, as long as there is a Downlight within 30m, the remote control distance can be limitless.
5. Modes Synchronization
Different downlights can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and within a 30m distance.
As is seen above, the RF RGBCCT LED Downlight is the most intelligent lighting, which combines multiple functions and is easily integrated into the smart home control system. It will be used for more and more lighting projects.

Specifications 6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070

Categories: ceiling lamps

Power, (W): 6W

Form: round

Input voltage, (V): AC110V~240V 50Hz/60Hz

Color t⁰ (K): 2700K-6500K

Luminous Flux, (Lm): 600Lm

Luminous Efficiency: 85lM/W

CRI: 80

Lifespan, (Hrs): 50000Hrs

Control Distance: 30m

Controller Type: APP control (2.4G gateway is needed)

Controller Type: RF Remote

Controller Type: Voice Control

Control Method: 2.4G RF

Beam Angle (⁰): 120⁰

Base type: GU10

Working Temperature, (⁰): -20-60⁰

Application: smart home

Application: smart lighting

APP Name: Tuya Smart Life

System: iOS/Android

Weight: 160g

Measurements 6W 2.4G RF RGBCCT LED Downlight IND45LAM128-LM070

Related products